The roof covering and nearby painted components are not the same scope. Before work on an older home, identify which surfaces will be disturbed and ask who is responsible for any lead-safe requirements.
Map the painted components in the work area
For a home built before 1978, ask the provider to identify whether the proposed work will disturb painted fascia, soffits, trim, siding, dormers, windows, doors, or other coated components near the roof edge. Keep those items separate from unpainted shingles, underlayment, and decking in the written scope.
EPA’s renovation FAQ says its Renovation, Repair and Painting rule applies to work that disturbs painted surfaces and specifically notes that removing an unpainted roof does not by itself trigger the rule. The practical question is which painted surfaces the actual project will disturb, not the age of the roof covering alone.
- Home construction year and known renovations
- Painted trim, fascia, soffit, siding, and dormers
- Components to remove, cut, scrape, sand, or drill
- Areas explicitly outside the roofing scope
Ask who evaluates and handles the painted work
If painted components may be disturbed, ask the contractor whether the project falls within federal, state, tribal, or local lead-safe requirements and who will make and document that determination. EPA describes certification and work-practice requirements for covered compensated renovation work in pre-1978 housing, but exemptions and local rules depend on the facts.
Do not treat a casual visual opinion as a test result. Ask what information or testing supports the plan, who is qualified to perform it, and what records you will receive. Homeowner-performed work can be treated differently, and EPA still recommends lead-safe practices for do-it-yourself renovation.
Put containment, cleanup, and waste boundaries in writing
The proposal should distinguish roofing debris from paint chips or dust and identify protection for openings, soil, landscaping, access routes, occupants, and pets. Ask how the work area will be contained, cleaned, inspected, and released for normal use when painted surfaces are part of the job.
If separate roofing and painting crews are involved, name the handoff. One crew should not assume the other is responsible for a painted component, cleanup step, or record that is absent from both scopes.
- Responsible certified firm or evaluator when required
- Work-area and occupant protection
- Debris, dust, and waste responsibility
- Cleanup verification and records
Keep the determination with the roof file
Retain the written scope, testing or determination records, required notices, change orders, cleanup documentation, and final photos with the roof contract. If concealed painted material changes the work, use the agreed change-order process before additional disturbance proceeds.
This checklist does not determine whether a particular project is covered by a lead rule. It helps surface the question early so the appropriate contractor or authority can apply the requirements to the actual property and scope.
Related guides
Sources and review
- U.S. Environmental Protection Agency: renovations covered by the Renovation, Repair and Painting Rule — checked 2026-10-31
- U.S. Environmental Protection Agency: lead-safe renovations for DIYers — checked 2026-10-31
Question frameworks and project-organization suggestions are Roofing Hound’s editorial recommendations. Source links do not imply endorsement. See our editorial approach.
Prepare for the next call
Compare written proposals and prepare follow-up questions.
Build and print a provider-call checklist, or compare local providers.
We can review your project and look for an independent provider. This free service is manual; availability and response time are not guaranteed.
Request free help ↗