A roof terminal, its flashing and the exhaust duct are one path but often cross trade boundaries. Document each termination, assign the work and verify that moist air still reaches outdoors after reroofing.

Map every exhaust path before tear-off

Identify bathroom fans, kitchen exhaust and clothes-dryer ducts that may terminate through the roof. From safe locations, record the interior equipment served, the visible exterior terminal and any unknown path; do not climb onto the roof or disturb a duct to trace it.

DOE's durable-attic guidance warns that exhausting moist air into an attic can contribute to mold, moisture and roof-assembly damage. Treat a duct that ends in the attic, a missing exterior terminal or an unclear connection as a separate ventilation problem that needs qualified review.

  • Room or appliance served
  • Known or suspected roof terminal
  • Existing moisture, staining or loose-duct concern
  • Responsible roofing and ventilation trades

Split the roof and duct scopes explicitly

Ask the roofing scope to name each terminal that will be removed, reused or replaced and to describe the exterior flashing and weatherproofing responsibility. Ask the ventilation scope to cover duct routing, connection, support and any required airflow or damper check.

DOE's roof-vent job aid treats a bath-fan termination as an exterior roof penetration. That does not make every roofer responsible for the connected fan or duct, so record exclusions and the qualified person who will close them.

Plan protection, reconnection and stop points

Before tear-off, decide whether connected equipment will remain off and how open ducts or roof penetrations will be protected from debris and weather. Require a clear handoff before roofing materials conceal the terminal or attic access becomes difficult.

If the crew finds a disconnected, damaged, poorly routed or attic-terminating duct, pause that portion of the work for a documented scope decision. Do not accept an improvised termination into the attic or assume that replacing the roof cap corrected the full exhaust path.

  • Equipment shutdown or use plan
  • Temporary weather and debris protection
  • Who reconnects and inspects the duct
  • Change-order path for hidden conditions

Verify the exterior discharge after the roof closes

At closeout, save ground-level or contractor-provided photos of each finished terminal and its flashing, plus records of any replaced duct, cap or damper. Ask the responsible qualified person to confirm that each system discharges outdoors and that its connection and operation match the approved scope.

Watch for new moisture, odor, staining, unusual fan noise or a terminal that no longer opens as expected. Those observations warrant follow-up; a watertight-looking roof cap alone does not prove that the connected exhaust system performs correctly.

Related guides

Sources and review

Question frameworks and project-organization suggestions are Roofing Hound’s editorial recommendations. Source links do not imply endorsement. See our editorial approach.

Prepare for the next call

Compare written proposals and prepare follow-up questions.

Build and print a provider-call checklist, or compare local providers.

We can review your project and look for an independent provider. This free service is manual; availability and response time are not guaranteed.

Request free help ↗