Visible marks and storm timing do not establish the full repair scope. Ask the provider and insurer to document what each inspected, what they concluded, and which decisions belong to whom.
Bring the event record without diagnosing the roof
Start with the storm date, the approximate time, safe ground-level photos, and any indoor changes you observed afterward. Keep the original files and note when each photo was taken. If conditions are still unsafe, wait; a complete record is not worth climbing onto a wet or damaged roof.
Use observations such as “water appeared near this ceiling after the storm” or “roof covering is visible on the ground.” Avoid turning those observations into a cause or coverage conclusion. The inspection should connect the visible evidence to a documented recommendation.
- Storm date and approximate time
- Safe exterior and interior photos with context
- Areas where water, debris, or changes appeared
- Earlier roof records, warranties, and repairs
Ask what the inspection did and did not cover
Request a written description of the areas inspected, the access method, the observed conditions, and any area that could not be evaluated. Ask whether the recommendation addresses only the roof covering or also considers decking, underlayment, flashing, vents, skylights, and drainage components affected by the proposed work.
A provider’s repair recommendation and an insurer’s coverage decision are different. Keep each organization’s documents separate and ask each one to explain its own assumptions.
Confirm which local or policy requirements apply
The Texas Department of Insurance’s coastal guidance illustrates why location matters: some repairs may require code compliance, an inspection, and a certificate. That program is specific to covered Texas areas, not a national rule.
Ask your local building authority whether a permit or inspection is required, and ask your insurer which policy steps or documents it expects. Put the answers and the responsible party into the project record before work begins.
- Permit or local inspection responsibility
- Product and installation documentation
- Insurer-requested photos or estimates
- Required completion or compliance records
Close the gap between estimate and completed work
Before approving the proposal, compare the described damage with the exact repair or replacement scope, exclusions, material choices, and process for unexpected conditions. Ask how changes will be documented before additional work proceeds.
At closeout, collect the final scope, approved changes, photos, warranty documents, receipts, and any permit or inspection record. The goal is a traceable project file—not a promise that a storm claim will be covered or that one repair method fits every roof.
Related guides
Sources and review
- Texas Department of Insurance: making repairs after a storm — checked 2026-10-28
- Texas Department of Insurance: help after a storm — checked 2026-10-11
- National Weather Service: severe thunderstorm safety — checked 2026-10-11
Question frameworks and project-organization suggestions are Roofing Hound’s editorial recommendations. Source links do not imply endorsement. See our editorial approach.
Prepare for the next call
Compare written proposals and prepare follow-up questions.
Build and print a provider-call checklist, or compare local providers.
We can review your project and look for an independent provider. This free service is manual; availability and response time are not guaranteed.
Request free help ↗