A roof-covering replacement can expose retrofit decisions that are difficult to revisit later. Record the existing conditions, applicable design path, responsible professional and closeout evidence without assuming one prescriptive detail fits every home.

Establish which wind-design path applies

Ask the provider or appropriate design professional which local code, permit requirements and site-specific wind conditions apply to the home. FEMA’s residential wind-retrofit guide focuses on one- and two-family dwellings in hurricane-prone regions and notes that much of its guidance may also be useful in other high-wind areas; it is not a substitute for the rules and design conditions at a particular address.

Record whether the project is an ordinary roof-covering replacement, a defined wind retrofit, or part of a grant or insurance program. Each path can have different documentation and inspection requirements. Do not describe a project as meeting a named standard or designation unless the responsible program or qualified professional confirms it.

  • Applicable code, permit and inspection path
  • Site-specific wind or exposure assumptions
  • Any program, grant or insurance documentation
  • Person responsible for design decisions

Separate the roof covering from the structural and water-control layers

Use distinct scope lines for the roof covering, roof deck condition, deck attachment, secondary water resistance, roof-to-wall connections and any damaged framing. FEMA treats these as separate parts of a wind-mitigation strategy rather than interchangeable upgrades.

Ask which components will actually be exposed during the planned work and how inaccessible conditions will be handled. A proposal should not imply that replacing shingles alone verifies concealed deck fasteners, connections or structural condition.

Create a hold-point record before concealed work is covered

Agree on the observations, photos or measurements that will be recorded after tear-off and before new layers conceal the deck. The record should distinguish existing conditions, required repairs, selected retrofit measures and items outside the roofer’s scope.

FEMA’s guide includes prescriptive limitations and cases that require engineering analysis. Ask the responsible professional to identify the applicable detail rather than copying a fastener size, spacing or sealing method from a general guide into the contract.

  • Deck and framing condition record
  • Attachment or sealing decision and its basis
  • Required professional or inspector approval
  • Change-order path for unexpected conditions

Collect evidence for the work that was actually completed

At closeout, request the permit and inspection record where applicable, dated photos of concealed retrofit steps, product information, approved changes and the final scope. Keep program or insurance forms separate from marketing language so the file shows who verified each requirement.

This workflow helps organize a conversation; it does not determine structural adequacy, code compliance, grant eligibility or insurance treatment. Use the local authority and qualified professionals responsible for those decisions.

Related guides

Sources and review

Question frameworks and project-organization suggestions are Roofing Hound’s editorial recommendations. Source links do not imply endorsement. See our editorial approach.

Prepare for the next call

Compare written proposals and prepare follow-up questions.

Build and print a provider-call checklist, or compare local providers.

We can review your project and look for an independent provider. This free service is manual; availability and response time are not guaranteed.

Request free help ↗